Raw Metal Sheet, Rods, Tubes: Aluminum Brass Bronze Carbon Chrome Copper Iron Lead Nickel Tungsten
  Silicone Bronze Stainless Steel Steel Tin Titanium Tool Steel
Plastic  Selections
Abs
Acetal
Acetate
Acrylic
CAB
Carbon Fiber
Ceramics
CPVC
CTFE
ETFE
EVA
FEP
Fiberglass
Fluorosint
Graphite
HDPE
Hytrel
Kapton®
Kevlar
Kydex
LLDPE
LDPE
MDPE
Mylar
Neoprene
Nomex
Noryl
Nylons
PBI
PBT
PCTFE
Peek
PEI - Ultem
PES
PetG
Petp Ertalyte
PFA
PAI
Phenolics - Laminates
Polycarbonate
Polyester
Polyimide - Vespel, Cirlex, Pyropel
Polypropylene
Polystyrene
Polysulfone
Polyurethane
PPS
PTFE -Teflon
PVC
PVDF
Rubber
Rulon
Silicone
Sintimid
TPE - Santoprene
Torlon
TPX
Turcite
Tygon
UHMWPE
Viton
Welding Rod

Square Watermelon Cases

Square Watermelon Growing Cases

Tube Caps & Plugs

Domestic Selling Policy 
Pinewood Derby Cars
K-mac Plastics
Domestic Selling Policy
Privacy
Contact Kmac Distribution

 

 

Component    Wt. %
C 0.38 - 0.43
Cr 0.8 - 1.1
Fe 96.785 - 97.84
Mn 0.7 - 1
Mo 0.15 - 0.25
P Max 0.035
S Max 0.04
Si 0.15 - 0.3
Physical Properties Metric English Comments
Density 7.85 g/cc 0.284 lb/in³  

Mechanical Properties
Hardness, Brinell 277 277  
Hardness, Knoop 302 302  Converted from Brinell hardness.
Hardness, Rockwell B 99 99  Converted from Brinell hardness.
Hardness, Rockwell C 28 28  Converted from Brinell hardness.
Hardness, Vickers 292 292  Converted from Brinell hardness.
Tensile Strength, Ultimate 883 MPa 128000 psi  
Tensile Strength, Yield 685 MPa 99400 psi  
Elongation at Break 19.2 % 19.2 %  in 50 mm
Reduction of Area 60.4 % 60.4 %  
Modulus of Elasticity 205 GPa 29700 ksi  Typical for steel
Bulk Modulus 140 GPa 20300 ksi  Typical for steel.
Poisson's Ratio 0.29 0.29  Calculated
Machinability 65 % 65 %  Based on AISI 1212 as 100% machinability.
Shear Modulus 80 GPa 11600 ksi  Typical for steel.

Electrical Properties
Electrical Resistivity 2.2e-005 ohm-cm 2.2e-005 ohm-cm  specimen hardened and tempered; 20°C (68°F)
Electrical Resistivity at Elevated Temperature 2.63e-005 ohm-cm 2.63e-005 ohm-cm  specimen hardened and tempered; 100°C (212°F)
Electrical Resistivity at Elevated Temperature 3.26e-005 ohm-cm 3.26e-005 ohm-cm  specimen hardened and tempered; 200°C (390°F)
Electrical Resistivity at Elevated Temperature 4.75e-005 ohm-cm 4.75e-005 ohm-cm  specimen hardened and tempered; 400°C (750°F)
Electrical Resistivity at Elevated Temperature 6.46e-005 ohm-cm 6.46e-005 ohm-cm  specimen hardened and tempered; 600°C (1110°F)

Thermal Properties
CTE, linear 20°C 12.2 µm/m-°C 6.78 µin/in-°F  0-100°C (32-212°F)
CTE, linear 250°C 13.7 µm/m-°C 7.61 µin/in-°F  20-400°C (68-750°F)
CTE, linear 500°C 14.6 µm/m-°C 8.11 µin/in-°F  20-600°C (68-1110°F)
Specific Heat Capacity at Elevated Temperature 0.473 J/g-°C 0.113 BTU/lb-°F  150-200°C
Specific Heat Capacity at Elevated Temperature 0.519 J/g-°C 0.124 BTU/lb-°F  350-400°C
Specific Heat Capacity at Elevated Temperature 0.561 J/g-°C 0.134 BTU/lb-°F  550-600°C
Thermal Conductivity 42.6 W/m-K 296 BTU-in/hr-ft²-°F  100°C
Thermal Conductivity at Elevated Temperature 33 W/m-K 229 BTU-in/hr-ft²-°F  600°C
Thermal Conductivity at Elevated Temperature 37.7 W/m-K 262 BTU-in/hr-ft²-°F  400°C
Thermal Conductivity at Elevated Temperature 42.2 W/m-K 293 BTU-in/hr-ft²-°F  200°C
 
Fasteners

Self Drilling Screws

Carriage Bolts

Self Tapping Screws

Hex Nuts

Set Screws

Lag Screws

Sheet Metal Screws

Wood Screws

Washers

Spring Pins

Threaded Rods

Dowel Pins

Socket Head Shoulder Screw

Taper Pins

Socket Head Cap Screws

Shafts

Metal/Plastics Spacers-Standoffs

Felt Sheets, Discs, Strips, Cords

Machine Screws

Drill Bits

U Channels

Circuit Breakers

Eyebolts

Spur Gears

Worm Gears

Miter Gears

Gear Racks

Helical Gears

Springs

Tapes- Skived, Adhesive Backed

Exhaust, Duct, Air, Vacuum Hose

Washers

Kmac Distribution  *  3821 Clay Ave. SW  *  Wyoming, MI  49548  Contact  

Domestic Selling Policy    Privacy

Goods and services provided by K-mac/TWS Plastics (MI, USA).
Sold by 2CheckOut.com Inc. (Ohio, USA).