6150 Alloy Steel Data
6150 is a fine grained, highly
abrasion resistant carbon-chromium alloy steel. Very good shock resistance and
toughness are also key properties of this alloy in the heat treated condition.
Carbon |
0.48
- 0.53 |
Chromium |
0.8
- 1.1 |
Iron |
Balance |
Manganese |
0.7
- 0.9 |
Phosphorus |
0.035
max |
Silicon |
0.15
- 0.35 |
Sulphur |
0.04
max |
Vanadium |
0.15
min |
Density |
0.284 lb/in3 |
Hardness, Brinell |
197 |
Tensile Strength |
97200 psi |
Tensile Strength, Yield |
60200 psi |
Elongation at Break |
23 % |
Modulus of Elasticity |
29700 ksi |
Bulk Modulus |
20300 ksi |
Poisson's Ratio |
0.29 |
Izod Impact |
19.9 ft-lb |
Machinability |
55 % |
Shear Modulus |
11600 ksi |
Electrical Resistivity |
2.34e-005 ohm-cm |
Specific Heat Capacity |
0.114 BTU/lb-°F |
Thermal Conductivity |
323 BTU-in/hr-ft2-°F |